Smeg AP2641TCE Cooktop User Manual


 
Instructions for the user
25
7.2 Hobs with touch-control buttons
When an icon is pressed the unit beeps to confirm.
To operate the panel of the hobs equipped with touch-controls, lightly press the icons printed on its
surface.
On first connection to the electrical mains, an operating check will be carried out automatically
and all the indicator lights will come on for a few seconds.
7.2.1 Switching on the hob
When not in use, all hob components will be switched off. Hold down
for 2 seconds to switch the
hob on; a led will turn on above the symbol to confirm that the hob is lit. If no functions are used within
30 seconds of switching the hob on, it will automatically turn itself off.
7.2.2 Single cooking zones
The relevant hotplate is indicated next to each control zone. For example, the
symbol identifies the
knob which controls the rear right-hand cooking zone.
Having switched on the hob as described in “7.2.1 Switching on the hob”, press the
and keys to
activate the hotplate (with the display indicating 0) and adjust the power to the desired operating
setting.
The operating power levels are 1 (lowest) to 9 (highest).
The power must be set within 5 seconds of activating the hotplate as otherwise it will deactivate
automatically.
To activate the hotplate and adjust its power level, press
and as follows:
1. Press
(0 appears on the display to indicate that the hotplate has been activated);
2. Press
again (9 appears on the display to indicate that the hotplate is active at the maximum
power setting).
3. Press
or to increase or reduce the power to the desired level (1…9).
7.2.3 Dual cooking zones
To activate heating of the dual cooking zone, once power 9 is reached by following the instructions
provided in paragraph “7.2.2 Single cooking zones”, press the
again. Now the maximum power of
the cooking zone is activated, and is shown by the LED light turning on next to the number indicating
the operating power. Press on the symbols
and to adjust the power of the dual cooking zone to
the desired value.
7.2.4 Triple cooking zones
To activate heating of the triple cooking zone, once power 9 of the dual cooking zone is reached by following
the instructions provided in paragraph “7.2.3 Dual cooking zones”, press the
again. Now the maximum
power of the triple cooking zone is activated, and the LED indicating the operating power remains fix. Press
on the symbols
and to adjust the power of the triple cooking zone to the desired value.
7.2.5 Heating zone
This zone, which is present only on some models in the range, keeps the area inside the dashed line
at a temperature of approximately 90°C. It is used for warming dishes up or keeping them hot. If the
hob is not locked, simply press the button
to switch it on. Press the button to switch it off.
7.2.6 Cooking zone lock-out
The cooking zone lock-out function is a user safety functions. It locks out the hob controls to prevent
the ceramic cooking zones being switched on accidentally.
Hold down
for 1 second to lock out the hob. The hob can be reactivated by holding down again
for 1 second.
7.2.7 Cooking zone layout
REAR LEFT
REAR RIGHT
REAR
CENTRAL
CENTRAL
FRONT LEFT
FRONT RIGHT
FRONT
CENTRAL
OVAL
CENTRAL