User instructions
10
SETTING THE WASHING PROGRAM
To select the most suitable program for the dishes to be washed refer to
the table below, which indicates the most appropriate program according
to dish type and degree of soiling.
DURATION
CONSUMPTION
PROGRAM SELECTION TYPE AND GRADE DIRT
PROGRESS
PROGRAM
MINUTES
(2)
WATER
LITRES (1)
POWER
KWh (2)
SOAK
PANS AND DISHES
AWAITING COMPLETION
OF THE LOAD
Cold prewash
15' 6 0,03
QUICK WASH
PARTIAL LOAD WITH
LIGHT DIRT
Wash at 45°C
2 cold rinses
34' 14 0,50
BIO
(*)
DISHES WITH
NORMAL DIRT, EVEN
WITH DRIED-ON RESIDUES
Cold prewash
Wash at 50°C
Rinse at 64°C
Dry
180' ** **
NORMAL
PANS AND DISHES
WITH NORMAL DIRT,
EVEN WITH DRIED-ON
RESIDUES
Cold prewash
Wash at 65°C
Cold rinse
Rinse at 70°C
Dry
100' 20 1,40
SUPER
VERY DIRTY PANS
AND DISHES, EVEN
WITH DRIED-ON RESIDUES
Prewash at 45°C
Wash at 70°C
2 cold rinses
Rinse at 70°C
Dry
115' 24 1,77
Only run the soak program with half loads.
The “3/1” OPTION (5) and DELAYED START (7) options cannot be used with the soak program.
The QUICK WASH program takes approximately 34 minutes and washes at 45°C, suitable for a
modest sized load of tableware with light soiling. Ideal for entertaining, it provides a clean set of
dishes in little over half an hour.
(*) Reference program as per EN 50242 standard
(**) See energy label
(1) Average power consumption with the softener set on level 2.
(2) The cycle duration and power consumption may vary according to the water and room
temperatures, and the type and amount of dishes.
The washing cycle will not take place if the dishwasher door is left open
or not properly closed.