Filter
Top Products
User instructions
53
If the door has to be opened while washing is in progress, the program
will be interrupted. The relative light will keep flashing and a beeper will
signal that the cycle has not been completed. When the door is closed
the program will continue from where it was interrupted. This operation
should only be carried out if strictly necessary, because it might
cause problems in execution of the program.
END OF CYCLE
At the end of the program the beeper sounds briefly and the lights of
programs 4 and 5 flash.
To switch off the dishwasher, open the door and press the ON/OFF
button (1).
REMOVING THE DISHES
At the end of the washing program, wait at least 20 minutes before
removing the dishes, to allow them to cool down.