Filter
Top Products
User instructions
56
ADDING THE RINSE AID
The rinse aid helps the dishes dry faster
and prevents the formation of scale
deposits and staining; it is automatically
added to the water during the final rinse
cycle, from the container situated on the
inner side of the door.
To add rinse aid:
x Open the door.
x Open the door S.
x Add the rinse aid until the container
is full (approximately 140 cc).
x The optical level indicator O on the side of the cap should be
completely obscured. Refill the rinse aid when the optical level
indicator becomes clear again, or when the rinse aid warning light
illuminates.
x Close the door S.
x Use a cloth to remove any spillage of rinse aid which might lead to
the formation of excess foam.
ADJUSTING THE RINSE AID DISPENSER SETTING
The dishwasher is factory set for medium water hardness. However it
possible to change the setting by turning the dispenser’s selector to the
desired position: the amount of rinse aid dispensed is proportional to the
selector position.
x The amount of rinse aid must be increased if the washed dishes
appear dull or feature circular stains.
x If, on the other hand, the dishes are sticky or have white streaks, it
is necessary to reduce the rinse aid setting.