Filter
Top Products
Front panel and commands
20
2.2 Description of commands
FUNCTION SWITCH KNOB
Selects the desired cooking functions. The symbols are shown below.
Turning the knob the various function symbols light up, simultaneous
with the timer and internal oven light indicators.
NO FUNCTION SET
UPPER AND LOWER HEATING
ELEMENT + VENTILATION
GRILL ELEMENT IN OPERATION
ALTERNATING WITH BOTTOM
HEATING ELEMENT
LOWER HEATING ELEMENT +
VENTILATION
UPPER AND LOWER
HEATING ELEMENT
VENTILATED HEATING ELEMENT +
VENTILATION
GRILL ELEMENT UPPER AND LOWER HEATING
ELEMENT + VENTILATED
HEATING ELEMENT
WIDE GRILL ELEMENT DEFROSTING
GRILL ELEMENT + VENTILATION
THERMOSTAT KNOB
Selection of cooking temperature.
Turn the knob clockwise to the required temperature, between 50°
and 250°C. The temperature light indicates that the oven in is heating-
up phase.
Once the set temperature has been reached, the light will stay lit
permanently until the end of cooking.
TIMER KNOB
Lets you choose manual cooking or the timer with automatic turn-off of
the oven when done.
For manual control of cooking time, turn the knob anticlockwise to the
symbol .
To set cooking time turn the knob clockwise. The numbers from 10 to
120 correspond to minutes. Adjustment is progressive and
intermediate positions between the numbers shown may be used.
At the end of programmed cooking an intermittent sound signal is
emitted. This can be de-activated by turning the function selector knob
to the position .