Instructions for Use
49
Changing the Direction of Opening the Door
If you find the direction of opening the door on
your appliance inconvenient, you can change it.
Holes on the opposite side have already been
prepared in the factory.
xUnscrew the kick-plate and remove it by
pushing downwards.
xUnscrew the lower hinge and take off the door
together with the upper hinge washer.
xUnscrew the upper hinge fastener and fix it on
the opposite side of the appliance.
xTake off, change and replace the door hinge
fixture and the fixture plugs.
xPut the door with the upper hinge washer on
the upper hinge fastener.
xFix the lower hinge with washer on the new
position.
xReplace the cover plate of the lower hinge to
the opposite side of the kick-plate and place it
to the appliance.
xIn case your appliance is equipped with a
handle mounted on the side of the appliance,
take it off and replace it on the other side.
Some screws are covered with caps. Take
them off before undoing the screws.
xCheck the gasket, it shouldn't be creased and it
should seal well.
Should the seal not adhere to the casing of the
appliance perfectly, it will have to be heated
from a suitable distance (by means of hair
drier, for example) and lightly stretched to the
required height.
1 Upper hinge fastener 5 Kick plate or control panel
2 Upper hinge washer 6 Cover plate of the lower hinge
3 Lower hinge 7 Fixture plug of the door hinge
4 Lower hinge washer 8 Door hinge fixture