Filter
Top Products
45
Instructions for the user
7.6.1 Change the settings in the secondary menu
The secondary menu appears at first use, after a power failure or by
holding PT1 down for 3 seconds with the oven in the OFF position (see
point “7.2 Operating modes”).
Changing the parameters in the secondary menu is very simple. See the
following diagram:
Turn PT1 to the right
to increase (
+) the
value or to set the
ON status.
Turn PT1 to the left
to decrease (
-) the
value or to set the
OFF status.
Press PT1 to move
to the next setting
in the menu. After
setting P3, press PT1 to
resume normal operation of
the oven.
SYMBOLSMENU MODIFICATION PROCEDURE