Filter
Top Products
EN
1
1
11
USE
Control board
Key Function Display
A Switches the motor on and off at the latest
selected speed
Indicates the selected speed
B Decreases the suction speed. -
C Increases the suction speed. -
D By pressing this key it is possible to start the
intensive speed from any previously selected
speed. This speed has been timed at 10 min-
utes. After that time the system activates auto-
matically the latest selected speed. This func-
tion is recommended for cooking condition
where vapours and odours need to be elimi-
nated immediately and quickly.
HI and the remaining time appear alternately.
The spot down at the right side flashes once a
second.
By pressing the key the function is stopped.
E By pressing this key it is possible to set up the
motor to a suction speed at 100 m
3
/h. During
the intensive speed or the Delay-function this
function cannot be activated.
24 appears and the spot down at the right side
flashes while the motor is on.
By pressing the key the function is stopped.
F By pressing this key it is possible to set the
delayed shutdown of the hood to 30 minutes.
This function is suitable for a complete elimi-
nation of residual cooking odours. Functioning
only when the motor is on(not during the 24H-
function or intensive function)
The suction speed and the remaining time be-
fore the hood shut down appear alternately The
spot down at the right side flashes.
By pressing the key the function is stopped
G By pressing this key for about 2 seconds it is
possible to reset the filter saturation alarm.
After 100 working hours a FF appears. Metal
grease filters have to be washed.
After 200 working hours EF appears. Char-
coal filters have to replaced.
H By pressing this key the intensity of the light-
ing system can be decreased cyclically.
I Switches on/off the lighting system at the ma-
ximum intensity.
L By pressing this key the intensity of the light-
ing system can be increate intensity.
Keyboard lock: it is possible to jam the keyboard when, for example, cleaning the glass. The
motor and lights are switched off.
By pressing the D-key (Intensive function) the keyboard block can be activated or deactivated.
This function is confirmed by a Beep and by moving motor LEDS on display.