Filter
Top Products
37
Instructions for the installer
9.2 Room ventilation
The appliance may only be installed in permanently ventilated rooms, as
specified by the standard UNI-CIG 7129 / 7131. In the room where the
appliance is installed, there must be an adequate air flow to meet the
requirements of normal gas combustion and the necessary ventilation of
the room itself. The air vent, protected by grilles, must be suitably
dimensioned (UNI CIG 7129 / 7131) and positioned so that no part of it is
obstructed, even partially. The room must be kept adequately ventilated in
order to eliminate the heat and humidity produced by cooking: in
particular, after prolonged use, it is recommended to open a window or to
increase the speed of any ventilators.
9.3 Extraction of the products of combustion
Extraction of the products of combustion must be ensured by means of
hoods connected to a natural draught chimney whose efficiency is
assured or via forced extraction. An efficient extraction system requires
precision planning by a specialist qualified in this area and must comply
with the positions and distances indicated by the regulations. When the
job is complete, the installer must issue a certificate of conformity.