Filter
Top Products
User instructions
15
CHANGING THE PROGRAM
To change the program, press and hold down the START/PAUSE button
(3) for a few seconds, then select the new program as described
previously in the instructions; press the START/PAUSE button (3) again,
holding it down for a few seconds.
DELAYING THE PROGRAM (available in all programs except the
soak program)
The PROGRAM DELAY button (4) can be pressed to delay the start of
the washing program by up to 12 hours. This means that the dishwasher
can be operated at the time of day of your choice.
Press the PROGRAM DELAY button (4) again; the INFORMATION
DISPLAY (8) will show the number of hours of delay with which the
appliance will start.
The INFORMATION DISPLAY (8) shows the set washing program
duration in hours and minutes.
After setting the delay, start the program: press the START/PAUSE
button (3) for a few seconds, until the START/PAUSE light (7) starts
flashing.
The appliance will prewash the dishes, after which the "program delay"
set previously will come into effect.
To cancel the program delay once the wash has started, proceed as
follows:
x press the START/PAUSE button (3) for a few seconds, until the
START/PAUSE light (7) stops flashing;
x press the PROGRAM DELAY button (4) several times until the
program delay returns to zero (the scheduled duration of the
program set appears);
x press the START/PAUSE button (3) to start the program.
N.B.: It is not possible to select the “delay program” when the program
have already began.
123456
78910 11
12