Filter
Top Products
User instructions
16
"2/1" OPTION BUTTON (on some models only)
(available in all programs except the soak program)
By pressing the button
(6)
you activate the "
2/1
" option, confirmed when
the relative light comes on. This option has been studied for the use of
dishwashing powder or tablets with integrated substances in place of
rinse-aid known on the market as “2 in 1” or “double action" products;
in this case the dishwasher will use the product in an optimal way avoiding
salt and rinse-aid consumption, which could already be found in
the dishwasher.
Note:
When selecting the "
2/1
" button, it is normal that the rinse-aid
light remain on, if the container are empty.
HALF LOAD WASH FUNCTION (on some models only)
This function is recommended for loads of up to
6 place-settings
, and
cuts down on the use of water and electricity.
By pressing the
½ LOAD WASH (5)
button it is possible to select only
upper basket washing.
After having the program selected, continue as follows:
• by pressing for one time the
½ LOAD
WASH (5)
button, it will select the upper
basket (the "½ LOAD WASH LIGHT " (9)
comes on);
• by pressing a second time the ½ LOADWASH(5) button it will bring
back to the full load washing mode (the "½ LOAD WASH LIGHT " (9)
One half of the cutlery basket can be placed in the top basket.
WARNING: do not load dishes and cutlery into the lower basket,
because the water spray will only reach the top basket.
goes out).