Filter
Top Products
GB-IE
Instructions for the User
29
11 EXTRAORDINARY MAINTENANCE
Occasionally, the oven will require minor servicing procedures or the
replacement of parts subject to wear and tear, such as gaskets, light
bulbs, etc. The specific operations for each procedure of this kind are
provided below.
Before carrying out any operation involving access to live parts,
disconnect the appliance from the electricity supply.
11.1 Changing the light bulb
To change the light bulb, proceed as follows:
Unscrew and remove the glass light cover (1).
Remove the halogen light bulb (2). Warning!
The bulb may be very hot.
Fit a new 12V / 10W halogen bulb. Warning!
Do not touch the light bulb surface directly with
your fingers because you may damage the
bulb. Follow the lamp manufacturer’s
instructions.
Screw the glass light cover into place (1).
Connect the oven again to the power supply.
11.2 What should I do if the oven doesn’t work?
WARNING! Any type of repair must only be done by a specialised
technician. Any repair done by a person not authorised by the
manufacturer is dangerous.
You do not need to contact Technical Assistance to resolve the following
questions.
The display is not showing! Check if:
The time indication has been switched off (see section on Basic
Settings).
Nothing happens when I press the keys! Check if:
The Safety Block is active (see section on Basic Settings).
The oven does not work! Check if:
The plug is correctly fitted in the socket.
The oven’s power is switched on.
The door is completely closed. The door should close with an audible
click.
There are any foreign bodies between the door and the cavity front.