Filter
Top Products
Instructions for the user
21
8.2.2 The electric element
After use, to make sure that the surfaces are clean and long lasting,
the electric element must be treated with specific cleaning products
which are available on the market. This necessary operation prevents
oxidisation (rust formation).
8.2.3 The cover
Clean the glass or steel cover, where mounted, with warm water.
Never use abrasive sponges or detergents.
Never lower the cover when burners or electric elements are on
or still hot.
Attention: the glass lid may break if overheated. Make sure that all the
burners are switched off and let them cool down before lovering the
lid.