Filter
Top Products
Instructions for the installer
11
5 ADAPTATION TO DIFFERENT TYPES OF GAS
Before performing any cleaning or maintenance work, disconnect the
appliance from the electrical socket.
The hob has been inspected for LPG at a pressure of 30 mbar.
5.1 Removing the separable control panel (models with
separable control panel)
1. Remove the knobs and the knob
guard tube “A” by pulling them up;
2. Use a crosshead screwdriver to
remove the screws and the two
cylindrical supports “B”;
3. Raise the left-hand side of the
control panel slightly and shift it to
the right to remove it completely;
4. In models with electric hotplate, the
body of the pilot light has to be
removed to free the control panel;
5. Raise the ignition crosspiece “D”
and rest it on the other side.
5.2 Removing the hob (models with integrated control
panel)
1. Remove the knobs, the
griddles, the burner caps, the
flame caps and the two rear
plugs;
2. Remove the screws “A”
which fix the burner supports;
3. Raise the hob, sliding it off
the ignition plugs and/or the
thermocouples and the gas
tap rods;
4. Lift the ignition crosspiece
and rest it on the other side.