Smeg SNZ90MFX Range User Manual


 
Instructions for the user
14
11.ELECTRONIC PROGRAMMER
LIST OF FUNCTIONS
MINUTE-COUNTER KEY
COOKING TIME KEY
END OF COOKING KEY
DECREASE TIME KEY
INCREASE TIME KEY
11.1 Clock adjustment
When using the oven for the first time, or after a power failure, the display flashes regularly and indicates
. Press the keys and and at the same time the keys or : each single press changes
the time by 1 minute either up or down.
Before setting the programmer activate the desired function and temperature.
11.2 Semiautomatic cooking
Use this setting for automatic oven switch-off at the end of cooking time. By pressing key the display
lights up, showing ; keep the key pressed and at the same time, press keys or to set the
cooking time.
Release key to start the programmed cooking time count. The display will now show the right time
together with symbols A and .
11.3 Automatic cooking
Use this setting to automatically start and stop the oven.
By pressing key the display lights up showing ; keep the key pressed and at the same time,
press keys or to set the cooking time.
By pressing key the sum of the right time + cooking time will appear; keep the key pressed and at the
same time, press keys or regulate the end of cooking time.
Release key to start the programmed count and the display will show the right time together with
symbols A and .
After set-up, to see the cooking time remaining, press the key ; to see the end of cooking time press
the key .Set-up with incoherent values is logically prevented (e.g. the contrast between a cooking
time and a longer period will not be accepted by the programmer).
11.4 End of cooking
When cooking is over, the oven will automatically switch off and, at the same time, an intermittent alarm
will sound. After switching off the alarm, the display will once again show the right time together with the
symbol , indicating that the oven has returned to manual operation mode.