Filter
Top Products
11
Installation Preparation
Check if the refrigerator can pass a
doorway or enter a door first.
Dimensions (including Door Handles)
(Width*Depth*Height) 905mm720mm1770mm
Find a suitable place to install
Sufficient space from the back of refrigerator to the wall for
free air ventilation.
Avoid direct sunlight.
Once the installation place is ready follow the
installation instructions.
If the surrounding temperature of refrigerator
is low (below 5), foods can be frozen or the
refrigerator can function abnormally.
If the refrigerator can not
pass through a door
during installation, follow
these steps.
(This guide refers to several models. The real features are
model dependent.)
Removing Freezer Door
Remove front bottom cover first, if it is attached.
Pull out bending tube guide and the left water tube.
Unscrew top hinge cover with a screw driver.
Turn top hinge fastener counterclockwise 3~4 times.
Disconnect the harness wires.
Lift up the front of hinge to remove. (After the hinge is
removed the door can fall down forward. Be careful!)
Be careful not to damage the water line when removing
the door.
Note
1
2
3
4
5