Smeg SSA91MFA Range User Manual


 
Instructions for the installer
5. DESCRIPTION OF CONTROLS
5.1 Front control panel
All the cooker controls and commands are on the front panel.
If the cooker is equipped with an electronic programmer, before using the oven make sure that
the symbol ; appears on the display. See paragraph “8. ELECTRONIC PROGRAMMER”.
DESCRIPTION OF SYMBOLS
FRONT RIGHT BURNER
CENTRAL BURNER
BACK RIGHT BURNER
VARIABLE GRILL
BACK LEFT BURNER
ELECTRIC OVEN THERMOSTAT
FRONT LEFT BURNER
ELECTRIC OVEN FUNCTION KNOB
HOB BURNER COMMAND KNOB
The flame is lit by pressing the knob and turning it anticlockwise to minimum
flame . To adjust the flame turn the knob between maximum ( ) and
minimum ( ). The burner goes out when the knob is returned to the position
.
ELECTRIC OVEN THERMOSTAT KNOB
Selection of cooking temperature is carried out by
turning the knob clockwise to the required temperature,
between 50° and 260°C.
If the appliance has an electric oven, the warning light
will come on when the oven is heating up. When it goes
out it means that the required temperature has been
reached. Regular flashing means that oven temperature
is being constantly maintained at the programmed level.
1
4