Filter
Top Products
Instructions for the user
21
14.ADDITIONAL MAINTENANCE
The oven may require additional maintenance or replacement of parts subject to wear such as seals,
bulbs, and so on. The following instructions describe how to carry out these minor maintenance
operations.
Before any intervention, disconnect the power supply of the device.
14.1 Replacement of light bulb
Remove cover A by twisting anticlockwise, replace bulb B with another similar bulb (25 W). Refit the
cover A.
Only use special oven bulbs (T 300°C).
14.2 Removing the door
Open the door completely and, with the aid of a fine-cut
screwdriver, turn hinges A completely.
Hold the door on both sides with both hands close to the
hinges, stop when the door is at an angle of about 45° and
remove.
To replace, fit together slot B and the oven housing and
put hinges A back into the position illustrated in the figure
with a push and the help of a screwdriver or suitable tool
until a click is heard.
14.3 Oven door seal
If it should be necessary to change the seal of the oven door, please refer to your nearest authorised
service centre.