Filter
Top Products
Instructions for the user
8
7. FRONT CONTROL PANEL
All the cooker controls and functions are on the front panel.
OVEN THERMOSTAT KNOB FRONT LEFT-HAND COOKING ZONE
OVEN FUNCTION KNOB REAR LEFT-HAND COOKING ZONE
VARIABLE GRILL REAR RIGHT-HAND COOKING ZONE
FRONT RIGHT-HAND COOKING ZONE
Before using the oven ensure that the electronic programmer displays the symbol ; see paragraph
“12. ELECTRONIC PROGRAMMER”.
HOB CONTROL KNOBS
With these knobs it is possible to control the cooking zones of the ceramic hob.
Each knob shows the cooking zone controlled. This picture shows the knob of
the front left-hand cooking zone.
Turn the knob to the right to regulate the functioning power of the cooking plate,
varying from a minimum of 1 to a maximum of 9.
The working power is indicated by a display positioned on the hob.
Heat accelerator.
Each cooking zone is equipped with a heat accelerator.
This system allows the user to select the main power level required for cooking. By making this choice
the hob will also automatically start with a full power boost followed by your chosen power. Eg by
selecting level 3 you will automatically begin on full power for 3.8 minutes and then reduce to level 3
without any physical adjustment. This function is useful for cocking vegetables or to bring the pan to the
boil and then reduce to a simmer automatically.
See table for details.
POWER SELECTED 1 2 3 4 5 6 7 8 9
FULL POWER TIME
IN MINUTES
0.8 2.1 3.8 5.2 6.8 2 2.8 3.6 0.2
To start the heat accelerator, rotate the knob to the left and select position «A», then release. The letter
«A» will appear on the display on the hob.
You now have 3 seconds to choose the desired heating position.
Once the position is adjusted from 1 to 8, «A» and the position selected will flash alternately on the
display.
Whilst the heat accelerator is functioning, it is possible to increase the intensity at any time. The period of
«full power» will be modified accordingly.
However it is not possible to reduce the intensity of the heat. If the knob is turned to the right whilst the
heat accelerator is functioning, this will stop it.
Power Function
With this function, it is possible to increase the power of zone 2 and/or 3 for 10
minutes. This function, for example, permits a large amount of water to be
brought to the boil quickly or to cook meat over a high heat.
Turn the knob to the right and programme the intensity of the heat to position 9,
select position «P» with the knob, then release. «P» will appear on the display
of the corresponding area of the hob.