Smeg SY4110 Range User Manual


 
Instructions for the User
26
16.EXTRAORDINARY MAINTENANCE
The oven may require extraordinary maintenance or replacement of parts subject to wear such as seals,
bulbs, and so on. The following instructions describe how to carry out these minor maintenance
operations.
Before performing any operations requiring access to powered parts, switch off the power supply to the
appliance.
16.1 Changing the light bulb
Remove the protective cover A by unscrewing it clockwise; replace the bulb B with another of the same
type (25 W). Re-fit the bulb protector A.
Use only oven bulbs (T 300°C).
16.2 Removing the door (auxiliary and static oven)
Open the door completely and insert the pins (supplied) into the holes from the inside. Close the door to
an angle of about 45° and lift it off. To reassemble, fit the hinges into their grooves, then lower the door
into place and extract the pins.