Smeg UKFC36RX2 Refrigerator User Manual


 
8
3) Dismantle the middle
hinge. Lift off the bottom
door. Mount the hinge
screws again.
1) Dismantle the top hinge. This
one is to be used later as top
hinge at the
opposite side. Lift
off the top door.
5) Dismantle the screws in
the middle of the new
hinge side. Mount
the bottom door and
screw on the middle
hinge.
8) Ajustment of the top
door: loosen the screws
in the hinge above the
door, loosen the hinge
above the door and turn
the hinge to the wanted
side. Tighten the screws.
9) Move the handle.
9. CHANGE OF HINGE SIDE
4) Remove the kick panel.
The bottom hinge is
dismounted at the 3
screws. The hinge is
turned 180° and
mounted
on the opposite side.
7)
The kick panel is mounted and the
hole plugs are mounted on the
opposite side.
6) Adjusting the bottom door: Loosen the
3 screws in the bottom hinge and push
the bottom hinge to the
required side. Tighten
the screws and mount
the kick panel.
2) On appliances with a
door closer on the upper
door, this door closer
should be removed and
remounted on the
opposite side.