Filter
Top Products
MQ STOW MS30H/MS30E MIXER — PARTS & OPERATION MANUAL — REV. #4 (08/10/06) — PAGE 21
Lug Nut Torque Requirements
It is extremely important to apply and maintain proper wheel
mounting torque on the trailer. Be sure to use only the
fasteners matched to the cone angle of the wheel. Proper
procedure for attachment of the wheels is as follows:
1. Start all wheel lug nuts by hand.
2. Torque all lug nuts in sequence. See Figure 8. DO NOT
torque the wheel lug nuts all the way down. Tighten each lug
nut in 3 separate passes as defined by Table 6.
MS30H/MS30E MIXER — TRAILER SAFETY GUIDELINES
NEVER!
use an
pneumatic air gun
to tighten wheel
lug nuts.
NOTE
Figure 8. Wheel Lug Nuts Tightening Sequence
3. After first road use, retorque all lug nuts in sequence. Check
all wheel lug nuts periodically.
stnemeriuqeReuqroTeriT.6elbaT
eziSleehWssaPtsriF
SBL-TF
ssaPdnoceS
SBL-TF
ssaPdrihT
SBL-TF
"2152-0204-5356-05
"3152-0204-5356-05
"4152-0206-05021-09
"
5152-0206-05021-09
"6152-0206-05021-09