Filter
Top Products
PAGE 26 — MQ STOW MS30H/MS30E MIXER — PARTS & OPERATION MANUAL — REV. #4 (08/10/06)
MS30H/MS30E MIXER — INITIAL START-UP
4. Turn the engine switch (Figure 15) to the ON position.
Figure 15. Engine ON/OFF Switch
5. Located on the engine cover is the main
start/stop
switch
(Figure 16). Pull this switch outward to start the engine.
Figure 16. Start/Stop Switch (gasoline)
6. Place the belt slip lever (Figure 17) in the
START/STOP
position.
Figure 18. Belt Slip Lever
(Start/Stop Position)
CAUTION:
Make certain the
drum lock pin
(Figures 18
and 19) is placed to the
right
(when viewing
the mixer from the towpole end) of the drum
stop block which is welded to the front side of
the drum. Also make sure lock pin is fully
engaged (locked). This will prevent the drum
from tipping.
7. Pull the
starter grip
(Figure 20) lightly until you feel
resistance, then pull briskly. Return the starter grip gently.
Figure 20. Starter Grip
Figure 19. Drum Lock Pin (Right Position)
Figure 19. Drum Lock Pin (Side-View)