Filter
Top Products
INSTALLATION HEAVY DUTY COUNTERLINE
Step 2c: Installation on Insulated Base
The appliance may be installed onto a flat NON-COMBUSTIBLE (but heat sensitive) surface using the
optional insulated base, as follows:
1. Attach the side pieces of the insulated base (items “A” in Figure 7 below) to the front piece (item “B”)
using the four sheet metal screws provided.
2. Position the insulated base on the surface where you want the appliance to be located.
INSTALLATION
3. Position the appliance on top of the insulated base. Lift the appliance only from the ends, never from
the middle!
4. Go on to Step 4 on page 18.
Figure 7