Filter
Top Products
HEAVY DUTY COUNTERLINE SPECIFICATIONS
SPECIFICATI
Figure 3
Front View Side View
Top View
Width (see table below)
30.0"
1.5"
21.5"
5.3"
11.0"
2.8"
16.0"
15.1"
10.0"
2.0"
29.4"
31.5"
DIMENSIONS OF CHARBROILER MODELS
ONS
Model Width Number and Size of Burners Total BTU
HDC-24 & HDCL-24 24" 4 @ 20,000 80,000
HDC-36 & HDCL-36 36" 6 @ 20,000 120,000
HDC-48 & HDCL-48 48" 8 @ 20,000 160,000
CONSTRUCTION OF CHARBROILER MODELS
The front, top-rail sides, and 5" riser are all stainless steel. The rear and bottom panels are aluminized
steel. The reinforced double-wall sides are fully insulated.
Each 6" section has a gas valve for independent control of flame. Each burner is covered by a stainless
steel radiant or by a layer of ceramic briquettes.
The heavy cast iron grids have wide-branding (1/4") on one side and narrow branding (1/8" with grease
channel) on the other side. The tilt of each grid can be adjusted. Chrome-plated grids can be ordered for
cooking fish.
OPERATOR’S MANUAL 1182845 REV 6 PAGE 7