Southbend P16C-C Range User Manual


 
PLATINUM SERIES SECTIONAL RANGE INSTALLATION
INSTALL AND OPERATIONS MANUAL 1185836 REV 3 (07/06) PAGE 29 OF 80
STEP 5: ATTACH FLUE RISER AND SHELF ASSEMBLIES
Install the flue riser(s) using the following procedure (as shown in Figure 16).
1. Attach any salamander broilers and flue-riser-mounted cheese melters to appropriate sections following the
installation procedure in the manuals for those options.
2. Slide each flue riser down onto the brackets projecting from the back of the corresponding section(s) of the
sectional range. Secure the flue riser to the brackets with the four provided 1/4-20x3/4 hex-head bolts, flat
washers, and lockwashers. Also, secure the bottom edge of the flue riser to the top rear edge of the sectional
range using the provided #10 sheet metal screws.
3. If access to the interior of the flue riser is necessary to make gas connections, make those connections at this
time.
Fi
g
ure 16
Installation of Flue Riser