Filter
Top Products
INSTALLATION COUNTER GRIDDLE
PAGE 10 OPERATOR’S MANUAL 1182629 REV 2
INSTALLATION
Step 2c: Installation on Insulated Base
The griddle may be installed onto a flat NON-COMBUSTIBLE (but heat sensitive) surface using the optional
insulated base, as follows:
1. Attach the side pieces of the insulated base (items “A” in Figure 5 below) to the front piece (item “B”)
using the four sheet metal screws provided.
2. Position the insulated base on the surface where you want the griddle to be located.
3. Position the griddle on top of the insulated base. Lift the griddle only from the ends, never from the
middle!
4. Go on to Step 4 on page 16.
Figure 5