Filter
Top Products
SPECIFICATIONS COUNTER GRIDDLE
PAGE 6OPERATOR’S MANUAL 1182629 REV 2
SPECIFICATIONS
Figure 2
2.24"
24.00"
29.08"
31.32"
16.00"
15.10"
9.96"
2.00"
29.42"
11.24"
2.78"
5.34"
Front ViewSide View
Top View
Width (see table below)
CONSTRUCTION
The front, sides, and 5" riser are all stainless steel. The rear and bottom panels are aluminized steel. The
reinforced double-wall sides are fully insulated.
The griddle surface is high-carbon, 1" thick, polished steel plated with trivalent chromium. The chrome plate
has an emissivity rating of approximately 0.08.
Each foot of griddle width is heated by a U-shaped burner controlled by a thermostatic gas valve for
independent temperature control. Each pilot is equipped with a flame failure safety device.
The base of a 60" griddle consists of the base of a 24" griddle and a 36" griddle connected together,
spanned by a 60" griddle surface with one grease duct and one grease drawer.
DIMENSIONS
Model Width Number and Size of Burners Total BTU Crate Size Crated Weight
SGS-24 & SGS-24E 24" 2 @ 30,000 60,000 31"W x 39"D x 24"H 305 lbs.
SGS-36 & SGS-36E 36" 3 @ 30,000 90,000 55"W x 39"D x 24"H 445 lbs.
SGS-48 & SGS-48E 48" 4 @ 30,000 120,000 55"W x 39"D x 24"H 545 lbs.
SGS-60 & SGS-60E 60" 5 @ 30,000 150,000 67"W x 39"D x 24"H 705 lbs.