Filter
Top Products
Page 10 Powder Hopper Loaders
1-8 Standard Features
Powder Hopper Loaders
• Stainless steel vacuum receiver
• Tangential 1
1
/2” (38mm) OD material inlet
• High flow blowback valve with electrical quick disconnect
and accumulator
• Twin bag filter assembly with glazed polyester filter bags
• Receiver-mounted junction box with 8 feet (2.6 m) of cable
to a field-mounted control box
• Material demand/level sensor
• High-performance centrifugal motor with electrical quick
disconnect
• Sound enclosure
• 9-foot (2.7 m) power cord
• Dual tube aluminum pickup wand with ten (10) feet (3 m) of
grounded flexible vinyl hose and two (2) hose clamps
• Counter-weighted flapper assembly.