Filter
Top Products
4.2.2. Re pla cing the out let flap sea ling
Re move the con nect ing plug “flap switch” (A) from the con nec tion hous ing of the
hop per.
Re move the ten sion ring (B) and the seal ing ring on the hop per loader.
Re move the up per part of the hop per loader (C) from the lower part of the hop per
loader (D).
Re move the old out let flap seal ing (E) and the ad he sive from the slot. Check that
no sticky rests are left be hind!
Glue the new out let flap seal ing into the slot. Use a suit able ad he sive (e.g.
Pattex).
Set the flap switch.
626-3MS
SSK-30
Main ten an ce 22
As sem bly seal ing
A B C D E