Filter
Top Products
60
Turn branches and leaves into mulch.
On the one hand you get pruned trees and shrubs, and on the other you get mulch for flower beds and
eliminate repeated trips to the tip. The Stiga recycling range contains four efficient machines, a shredder,
a chipper and a couple of leaf blowers.
BIO POWER
anks to a 2100 W motor and twin reversible blades,
our Bio Power chipper can tackle branches up to 40 mm.
Self-feeding function and overload protection. Collector
included.
BIO UIET
This low-noise shredder has capacity for branches up to 45 mm.
Power is 2100 W, and the gearbox gives tremendous torque.
There is a reverse feed function to clear any blockage that may
occur.
The motor has an overload protection and a zero current switch
for extra safety. Counter plate clearance is easy to adjust. A canvas
collector is included as standard.
SBL 250 H
This handy, versatile blower is among the lightest in its category.
Handheld with a 22.5 cc, 0.98 kW low-noise engine, it offers
exceptional performance in terms of air speed and volume of
blown air. Maximum air speed is 55 m/sec. Collector available
as an option.
SBL 620 B
A back-pack blower with exceptional power even during
arduous use. Impressive power-to-weight ratio with a 62 cc,
2.9 kW engine and, thanks to the ergonomic design of
the back-pack, it allows a prolonged work period without
tiring the operator. Maximum air speed 87 m/sec gives
execptional working reliability and efficiency for
completing tasks in the minimum amount of time.
SHREDDERS & BLOWERS