Filter
Top Products
7
3.1 OPERATOR'S SAFETY PRECAUTIONS
SAFE OPERATION IS NOT AN ACCIDENT; Observe
these rules:
A. Know the freezer. Read and understand the
Operating Instructions.
B. Notice all warning labels on the freezer.
C. Wear proper clothing. Avoid loose fitting garments,
and remove watches, rings or jewelry which could
cause a serious accident.
D. Maintain a clean work area. Avoid accidents by
cleaning up the area and keeping it clean.
E. Stay alert at all times. Know which switch, push
button or control you are about to use and what
effect it is going to have.
F. Disconnect electrical cord for maintenance.
Never attempt to repair or perform maintenance on
the freezer until the main electrical power has been
disconnected.
G. Do not operate under unsafe operating condi
tions. Never operate the freezer if unusual or exces
sive noise or vibration occurs.
SECTION 3
INITIAL SET-UP AND OPERATION
3.2 OPERATION CONTROLS AND INDICATORS
Before operating the freezer, it is required that the
operator know the function of each operating control.
Refer to Figure 9 and 10 for the location of the operating
controls on the freezer. Additional information on the
IntelliTech control, including consistency adjustment can
be found in Section 4.
WARNING
High voltage will shock, burn or cause death. The
OFF-ON switch must be placed in the OFF position
prior to disassembling for cleaning or servicing. Do
not operate machine with cabinet panels removed.
A. SPIGOT SWITCH
The SPIGOT switch will automatically actuate the
auger drive and refrigeration systems when the
spigot is opened to dispense product. When the
spigot is closed, the drive motor and compressor will
remain "on" until the product in the barrel reaches
the proper consistency.
Figure 9. Controls
Dispense Rate Adjuster
IntelliTec Control
(See Figure 10)
Freezing Cylinder
Off-On Switch