Filter
Top Products
subzero.com/specs
|
27
BUILT-IN REFRIGERATION
Dual Installation
If two units are installed side by side, a dual installation kit
may be required. Installations without a custom ller strip
require a dual installation kit. If a dual installation kit is not
specied, a 2"
(51) ller strip is recommended between units.
A custom ller strip is required when installing two French
door or side-by-side models. Dual installations without a
ller strip can only be accomplished using two units with
opposite hinges. Refer to the illustrations below.
Dual installation kits are available through an authorized
Sub-Zero dealer. For local dealer information, visit the nd a
showroom section of our website, subzero.com. For ques-
tions regarding the installation, call Sub-Zero customer care
at 800-222-7820.
WITHOUT FILLER STRIP
FILLER STRIP
Opposite hinges.
Same side hinges.
For dual standard installations, panel dimensions are the
same as for single installations. Refer to the charts on pages
20–23. Panel dimensions and offsets for dual ush inset
installations are listed on the following pages.