Filter
Top Products
12
CONTROL KNOB OPERATION
Each burner has full flame and full simmer
capabilities. Knobs are designed as two-tiered
”
push-to-turn” knobs. One tier is used for
HIGH through LOW flame settings; the second
tier controls SIMMER settings. Refer to the
i
llustration below. Although this is a child-safe
design, children should never be left unat-
tended in the kitchen when the cooktop is in
use.
To light a burner, push down and turn the
corresponding control knob counterclockwise
to the HIGH setting. You will hear a clicking
sound and see the burner ignite. Once the
burner is lit, continue turning the knob
counterclockwise to any one of the settings—
HIGH through LOW.
To select a SIMMER setting, turn the burner
knob to the LOW setting; you will feel a stop
detent in the knob rotation. Push down on the
knob, continuing to turn it counterclockwise.
This moves it to the second tier. Now, select
any variation within the SIMMER flame
settings—HIGH through LOW.
WOLF GAS COOKTOP USE & CARE
HIGH
LOW
OFF
HIGH
SIMM
ER
LOW
HIG
H
LOW
OFF
HIG
H
SIM
MER
LOW
HIG
H
LOW
OFF
HIG
H
SI
M
MER
L
OW
HIG
H
LOW
OFF
HIG
H
SIM
MER
LOW
HIGH
LOW
OFF
HIG
H
SIMM
ER
LOW
Two-Tiered
Control Knobs
Two-tier burner control knobs
Never leave pans on a HIGH setting unat-
tended. Be particularly cautious when
cooking food in fat or grease. It can
become hot enough to ignite.
BEFORE USING YOUR COOKTOP
Before using for the first time, you should
clean your gas cooktop thoroughly with hot
w
ater and a mild detergent. Rinse and dry with
a soft cloth. This removes any residual oil and
grease left on the surface from the manufac-
t
uring process. Apply a stainless steel polish to
protect the finish and add luster. Refer to Care
Recommendations on page 15.
IMPORTANT NOTE:
Before using your gas
cooktop, check that the surface burner caps are
positioned correctly.