Sub-Zero e Series Oven User Manual


 
WOLF E SERIES BUILT-IN OVENS
STANDARD INSTALLATION OPTIONS
E SERIES BUILT-IN SINGLE OVEN
The Wolf E Series single oven may be installed
in combination with a Wolf convection or non-
convection microwave oven with 762 mm
E Series trim kit, and a Wolf warming drawer
with E Series stainless steel drawer front or
integrated drawer front. Refer to the illustra-
tion below, and pages 6–9 for installation spec-
ifications for E Series single ovens.
Keep in mind that the size of the custom
panel for the warming drawer with integrated
drawer front will vary according to the
specific installation. Refer to the installation
instructions provided with the microwave trim
kit and warming drawer front for detailed
specifications. Dimensions will vary according
to the specific installation.
727 mm
WARMING DRAWER
OPENING WIDTH
127
mm
102 mm
E
60 mm
691 mm
610 mm
min
691 mm
NOTE: Unless you are using cabinets deeper than 610 mm, it is recommended that the
electrical supply for the oven be placed in an adjacent cabinet.
51 mm
x
51 mm
ANTI-TIP BLOCK
232 mm
606 mm
min
610 mm
min
232 mm
606 mm
min
ANTI-TIP BLOCK APPLICATIONPLATFORM APPLICATION
22 mm
PLATFORM
22 mm
724 mm
OVEN OPENING WIDTH
127
mm
102
mm
E E
ELECTRICAL LOCATION
WITHIN OPENING
APPLIES ONLY TO
CABINETS DEEPER
THAN 610 mm
25 mm
min
511 mm
min
475 mm
25 mm
min
511 mm
min
475 mm
699 mm
MICROWAVE
OPENING WIDTH
127
mm
102 mm
E
838 mm
RECOMMENDED CABINET WIDTH
762 mm
min
STANDARD INSTALLATION – MODELS ICBSO30-2F/S AND ICBSO30-2U/S
Single oven installed with convection microwave with 762 mm E Series trim and warming drawer with E Series stainless
steel drawer front.
14