13
SUB-ZERO UNDERCOUNTER USE & CARE
LIGHTING INFORMATION
Model UC-24B has rope-style lighting mounted
to the top interior of the cabinet that cascades
d
own the sides of the unit.
A
ll Undercounter models have a recessed light
bulb in the ceiling of the unit. To change the
bulb, remove the 25-watt bulb by unscrewing it
f
rom the socket. Install a new 25-watt bulb.
Refer to the illustration below.
CLEANING
CONDENSER CLEANING
C
lean the condenser area every three to six
months. The cleaning schedule will depend on
the amount of dust and lint that accumulates
i
n this area.
The condenser is located behind the kickplate.
R
emove the kickplate to expose the condenser
area. Refer to the illustration below. Use a soft
bristle brush and vacuum hose to remove dust
and lint from the condenser area. To avoid
bending the condenser fins, be sure to vacuum
in the direction of the fins (up and down).
Before cleaning the condenser, shut the
electricity off at the control panel. When
you clean the condenser, wear gloves to
avoid injury from the sharp condenser fins.
Failure to clean the condenser could
result in temperature loss or mechanical
failure or damage.
Shut off power to the unit before replac-
ing the light bulb. Wear protective gloves
when handling bulbs.
Kickplate
Recessed
Light Bulb
Condenser location Light bulb location