6
Using your Snack Heroes
™
Chocolate Fountain
1.Turnthechocolatefountaintothe‘off’dial
setting.
2.Plugtheunitintoa230-240voltAC
power outlet and switch the power on.
Note: Placethechocolatefountainonaflat
level bench.
3.Turnthedialtothe‘warmup’functionto
allow the base to warm up for 5 minutes.
4. Melt chocolate according to directions on
page 7.
5.Pourthemeltedchocolatemixtureinto
the base of the fountain and switch the
dialto‘chocflow’tostartthechocolate
fountain flow. See figure 4.
Note: Tooperatethechocolatefountain,the
chocolate must always be in liquid form.
6.Allowthechocolatefountaintoflowforat
least5minutesbeforeaddingextraoil.
Note:Ifthemixtureisnotflowingcorrectly
see troubleshooting on page 9.
Donotleavechocolateinthefountain
overnightinthe‘warmup’setting.This
setting is not a high enough temperature to
keep the chocolate from hardening.
Figure4