Filter
Top Products
4
Features of your Gelateria (continued)
LED timer display
Set time - The preselected time for churning
a mixture is displayed on the left side of the
panel in red and remains constant throughout
the churning process. This set time can be
increased with increments of 5 minutes until
a maximum of 60 minutes is reached. In the
event that additional time is required above
60 minutes, the appliance will reset to 5
minutes. Set time will flash to indicate that
the timer has not yet started.
Remaining time - the remaining time for
churning a mixture is displayed on the right
side of the panel in green and will decline
by 1 minute. When
minutes is reached,
the timer will flash and beep for 5 counts,
indicating that the churning will finish in 2
minutes. When the timer has reached the
set churning time, the remaining time will
display
and the timer will beep for 18
counts.
Start/Stop - Pressing the Start button will
commence the timer and rotation of the
paddle. Alternatively, whilst the appliance is
operating, pressing the Stop button will stop
the timer as well as the paddle. Additionally,
pressing the Stop button will cancel the
beeping notice of the timer, if desired.
Timer Select - Allows you to select the time
necessary to make a particular frozen dessert,
with 5 minute increments up to 60 minutes.
When this time is reached, the paddle motor
will switch off automatically and beep for 18
counts.