Filter
Top Products
Before Use:
After unpacking your Pure Juice, we
recommend that you dissemble the unit
before using for the first time. Wash all parts
except the Motor Base in hot soapy water.
Rinse and dry immediately.
Important:
Always ensure your Pure Juice is unplugged
from the power outlet when not in use,
assembling or removing parts.
To assemble your Pure Juice
(See opposite)
1. Set up the Motor Base on a dry level
surface with the On/Off switch facing the
user.
2. Place the Juice Collector onto the Motor
Base.
3. Position the stainless steel grating and
filtering basket on to the drive shaft.
4. Place the Lid/Feed Tube on top of the
Pure Juice and secure by clipping the two
safety levers on the sides of the juicer into
position.
Note: As an added safety feature the Pure
Juice will not operate if the safety levers are
not locked in place.
5. Position the Pulp container in place.
6 Plug the Pure Juice into the 230-240V
power outlet and turn on Power. Position
a glass or jug under the Juice outlet and
commence juicing.
4
Assembling your Sunbeam
Pure Juice
Food Pusher
Lid/Feed Tube
Stainless steel
grating and
filtering basket
Safety Lever
Drive Shaft
Motor Base
On/Off Control
Button
Juice Collector /
Outlet
Continuous
Flow Pulp
Container