Filter
Top Products
How to use the Electronic Programming
(PC4700 model only)
Setting the clock
1. Plug the coffee maker into a 230-240 volt
AC power outlet and switch power on, the
numbers on the LCD will flash until you set
time of day.
2. To set time of day press H (hour) button
to set the current hour. AM or PM will be
displayed.
3. Press M (minutes) button until you reach
the current time.
Setting the automatic operation
After you have set the time, you may now set
the Automatic Operation.
1. Make sure the clock is set for the correct
time of day.
2. Fill coffee maker with the desired amount
of water and coffee. Place the carafe into
position on the warming plate.
3. While holding down the PROGRAM button,
press the H and M buttons until the desired
brewing time is reached.
4. Once the desired brewing time has been
reached, release the PROGRAM button and
the current time will be displayed on the
LCD.
5. Press the AUTO button to set the coffee
maker to come on automatically at the
desired time.
6. An illuminated small green light to the left
of the AUTO button indicates that the brew
cycle will begin at the set time.
7. Press the AUTO button again to cancel the
automatic brew.
Using your Aroma Coffee
™
12 (contined)
6