Filter
Top Products
process of pre-setting, memory cooking programs is set at the same time, only cooking
programs can be recorded and the pre-set time will not be recorded.
18. Inquiring Function
(1) In clock state, press " AM/PM " to display "AM/PM" for 3 seconds.
In cooking state, press " CLOCK ", the LED will display clock for three seconds and the
"AM/PM" for another 3 seconds.
(2) In pre-set state, the LED will display the clock and the seconds will be flashing at the same
time. Press " AM/PM " and "AM/PM" will be displayed for 3 seconds. Then press
" CLOCK " to inquire the pre-set time. The pre-set time will be flashing for 3 seconds,
then "AM/PM" will be displayed for another 3 seconds. After that, the oven will turn back
to the clock state.
(3) In the level 1 cooking state, press " POWER " to inquire microwave power level, and the
current microwave power will be displayed. After three seconds, the oven will turn back
to the previous state.
(4) In the level 2 cooking state, the inquiring way can be done by the same way as above.
19. Child Safety Lock Function
Lock: In waiting state, press " STOP " for 3 seconds, there will be a long "beep" denoting
the entering into the children-lock state; meanwhile, LED will display " "
Lock quitting: In locked state, press "STOP" for 3 seconds, there will be a long "beep"
denoting that lock is released.
(5) Press the numerical pads to input higher minutes, the lower minutes will flash;
(6) Press the numerical pads to input lower minutes, and press " START "
to confirm the pre-set cooking. The oven will then turn back to the clock displaying state,
and the clock indicator ":" will flash.
(7) When the pre-set time is reached, two "beep" will sound denoting the beginning of the
cooking.
Note: The clock must be set before the pre-set cooking. If the cooking program has not
been saved and only the pre-set time have been programmed, the oven can only be used as
an alarm clock and five "beep" will be sound when the pre-set time is reached.
17. Pre-set Function
(1) Set a certain cooking procedure(one block or two),the setting method and display is
same as relevant cooking procedure.(Defrosting is beyond pre-set cooking).
(2) Press " CLOCK " to display the current clock, "clock" indicator will light
the higher hour indicator will be flashing, ":" and other "0" 's will light.
(3) Press the numerical pads to input higher hour, the lower hour will flash;
(4) Press the numerical pads to input lower hour, the higher minutes will flash;
15