Filter
Top Products
Troubleshooting continued
The Bag Melts:
• Should sealing strip overheat and melt
the bag, it may be necessary to lift the lid
and allow sealing strip to cool for a few
minutes.
• Built-in safety shut-off may shut the
appliance off if it becomes overheated.
Allow the unit to cool down for 20 minutes
and try again.
The FoodSaver
®
Storage Life with FoodSaver
®
Canister will not vacuum:
• Make sure the rubber gasket on the
canister lid is free from food materials,
crumbs, coffee grinds, etc.
• Make sure the rim of the canister does not
have any cracks or scratches. Any gaps can
prevent a vacuum from forming.
• Make sure you aren’t filling the canister
too full prior to vacuum packaging. Always
leave at least 7.5cm between the contents
and the lid.
The FoodSaver
®
Storage Life with FoodSaver
®
Bottle Stopper will not vacuum:
• Make sure the Bottle Stopper is fitting
snugly inside the bottle. If it is loose,
air may leak in and prevent a vacuum
fromforming.
• Make sure the neck of the bottle and tip
of the Accessory Hose are free from food
materials, crumbs, etc. Any gaps created
by food etc, will prevent a vacuum from
forming:
NOTE : For all accessories, make sure the
Accessory Hose is completely inserted into
appliance and lid of accessory. Twist grey tab
on Accessory Hose while inserting to ensure
a tight fit.
19