Filter
Top Products
How to make a Bag from a FoodSaver
®
Roll.
1. Place the appliance on a flat, dry surface
and plug the supply cord into a standard
electrical outlet.
2. Open the lid.
3. Cut roll to desired length plus 7.5 cm.
Place one end of the bag on the sealing
strip, but do not place the bag into the
vacuum channel. See figure 1.
4. Close the lid.
5. Position your hands over the “PRESS/
HOLD” icons on both sides of the lid
and press firmly with the palms of your
hands. See figure 2.
The motor will start. Continue to press
and hold until the green auto-vacuum
indicator light illuminates. See figure 3.
You may now remove your hands from the
lid and wait for the vacuum process to
continue.
6. The red sealing indicator light illuminates
to inform you when sealing is in progress.
7. When the red indicator light turns off,
press the “Release/Cancel” button. See
figure 4.
Lift the lid and remove the bag.
NOTE: Wait 20 seconds before
vacuuming and / or sealing again.
6
Using your FoodSaver
®
VAC430
Press and hold
Figure 1
Figure 3
Figure 2
Press Release/Cancel
Figure 4