Filter
Top Products
6
Slide the door down, away from hinge
pin located on the top of the door.
Remove the plastic cover from door
hinge. Unscrews the two screws and
transfer them to the other side.
Secure the top hinge and slide the door
back into place. Be sure the door is
facing up. Replace the plastic over on
the top bracket by pressing down until it
clicks into position.
Place and secure bottom bracket as well
as the foot on other side.
Check that door is aligned both
horizontally and vertically. Check the
seals are closed on all sides before
finally tightening the bottom hinge.
Re-adjust the leveling feet.