Filter
Top Products
3
A MAS3 Overview
Operating the MAS3 is straight forward and simply a matter of plugging the MAS3’s power supply
into an available A.C. outlet, and then plugging the MAS3’s power supply into the back of the MAS3.
To operate the MAS3 manually, press the power switch, located on the very left of the MAS3 to cy-
cle power.
Press any one of the three channel switches to switch the MAS3 to the selected channel.
If the MAS3’s power is turned off, selecting any one of the three inputs will cause the MAS3 to power
on and switch to the selected channel.
POWER TOGGLE CHANNEL 1CHANNEL 2CHANNEL 3
• POWER TOGGLE. Pressing this button will cycle power from on to off, and off to on.
• CHANNEL 1. Pressing this button will select channel 1 of the MAS3’s inputs, if power is off when
this button is pressed, then the MAS3 will power on, and select channel 1.
• CHANNEL 2. Pressing this button will select channel 2 of the MAS3’s inputs, if power is off when
this button is pressed, then the MAS3 will power on, and select channel 2.
• CHANNEL 3. Pressing this button will select channel 3 of the MAS3’s inputs, if power is off when
this button is pressed, then the MAS3 will power on, and select channel 3.
1
2
3
ZEKTOR