Tamarack Technologies HV1600 Ventilation Hood User Manual


 
Wiring
Important - Wiring the HV is different than a normal ON/OFF fan. Because the doors are motorized, they
need power to open and power to close. The HV requires a constant source of power. The fan operation is
controlled internally. Please follow the instructions carefully. It is recommended that the wiring of the HV be
done by a licensed electrician.
Be sure to turn off power before wiring the HV Whole House Fan
HV1000
HV1600 (Optional Wiring)
Hardwiring the unit to wall switches using the
BLUE and YELLOW wires will provide addi-
tional, manual control. Using these switches
will override the remote control function.
The HV whole house cooling fans are not
for use with solid state speed controls
HV1000 ........................................78 Watts
H
V1600.......................................140 Watts
HV1000.......................................1150 CFM
HV1600 High..............................1600 CFM
HV1600 Low...............................1150 CFM
Operating your HV
Important - Be sure at least one window is open when the fan is operating.
HV1000 - The HV1000 is operated by the wall switch (not included) installed per the
wiring instructions. An optional remote control kit is available (Part# TTi-HVRC).
HV1600 - The HV1600 is controlled by the hand held remote transmitter. Additional
controls, when used, may override the remote control. See the Wiring section of this
manual for further details.
HV1000 & HV1600.........................R-38