Filter
Top Products
2To the Operator Models 380/381
050906
Section 2 To the Operator
The freezer you have purchased has been carefully
engineered and manufactured to give you dependable
operation. The Taylor Model 380/381, when properly
operated and cared for, will produce a consistent quality
product. Like all mechanical products, this machine will
require cleaning and maintenance. A minimum amount of
care and attention is necessary if the operating procedures
outlined in this manual are followed closely.
This Operator’s Manual should be read before operating or
performing any maintenance on your equipment.
Your Model 380/381 will NOT eventually compensate and
correct fo r any errors during the set-up or filling operations.
Thus, the initial assembly and priming procedures are of
extreme importance. It is strongly recommended that all
personnel responsible for the equipment’s operation s tudy
these procedures in order to be properly trained and to make
sure that no misunderstandings exist.
In the event you should require technical assistance, please
contact your local authorized Taylor Distributor.
If the crossed out wheeled bin symbol is affixed to
this product, it signifies that this product is compliant with the
EU Directive as well as other similar legislation in effect after
August 13, 2005. Therefore, it must be collected separately
after its use is completed, and cannot be disposed as
unsorted municipal waste.
The user is responsible for returning the product to the
appropriate collection facility,as specified by your local code.
For additional information regarding applicable local laws,
please contact the municipal facility and/or local distributor.
Compressor Warranty Disclaimer
The refrigeration compressor(s) on this machine are
warranted for the term indicated on the warranty card
accompanying this machine. However, due to the Montreal
Protocol and the U.S. Clean Air Act Amendments of 1990,
many new refrigerants are being tested and developed, thus
seeking their way into the service industry. Some of these
new refrigerants are being advertised as drop-in
replacements for numerous applications. It should be noted
that, in the event of ordinary service to this machine’s
refrigeration system, only the refrigerant specified on the
affixed data label should be used. The unauthorized use
of alternate refrigerants will void your compressor warranty.
It will be the owner’s responsibility to make this fact known to
any technician he employs.
It should also be noted that Taylor does not warrant the
refrigerant used in its equipment. For example, if the
refrigerant is lost during the course of ordinary service to this
machine, Taylor has no obligation to either supply or provide
its replacement either at billable or unbillable terms. Taylor
does have the obligation to recommend a suitable
replacement if the original refrigerant is banned, obsoleted,
or no longer available during the five year warranty of the
compressor.
The TaylorCompanywillcontinuetomonitorthe industryand
test new alternates as they are being developed. Should a
new alternate prove, through our testing, that it would be
accepted as a drop-in replacement, then the above
disclaimer would become null and void. To find out the
current status of an alternate refrigerant as it relates to your
compressor warranty, call the local Taylor Distributor or the
Taylor Factory. Be prepared to provide the Model/Serial
Number of the unit in question.