Taylor AJ-1400-BL Juicer User Manual


 
9
USING THE CITRUS JUICER
Assemble the appliance with the citrus juicer components.
Make sure the appliance is switched off and unplugged.
Be sure the securing clamps are safely locked before plugging in the unit.
Clean and wash the citrus fruit to be used.
Plug the appliance into the electrical outlet.
Slice the fruit into halves.
By simply placing the citrus fruit half onto the cone and pressing slightly, the
appliance will begin to operate and extract juice into the collecting container.
Use either the larger or smaller cone, depending on the size of the fruit to be
juiced. The larger cone is suitable for grapefruit and large oranges. The
smaller cone is best suited for small oranges, lemons and limes.
Open the non-drip valve in order for the juice to flow to the collecting cup.
CLEANING AND MAINTENANCE
After each use and before cleaning, unplug the appliance from outlet and allow the
unit to stop. DO NOT ATTEMPT TO CLEAN WHILE THE MOTOR IS
RUNNING OR THE COMPONENTS ARE STILL MOVING.
CAUTION: NEVER IMMERSE THE BASE UNIT, CORD OR
PLUG IN WATER
Open the securing clamps by pushing the release button.
Remove plunger, cover, pulp container and grater/filter basket and clean under
clear running water. A mild dish detergent may be used as well. If using deter-
gent, be sure to rinse and dry thoroughly.
If you have problems removing small particles from the grater/filter basket, a
small soft brush will remove remaining particles, (i.e. toothbrush, vegetable brush,
dish brush).
Dry all parts thoroughly.
To facilitate easier cleaning, rinse the filter immediately after use.
NEVER WASH THE BASE MOTOR UNIT. To clean the base, wipe clean
with a damp sponge and dry immediately. Never use excess water, treated cloths,
harsh cleaning agents, or sprays.
Reassemble all parts and store in a dry place.