Filter
Top Products
20
Use of the Oven
Note
The electronic clock features Touch-Control
technology. To operate, simply touch the glass
control symbols with your fingertip.
The touch control sensitivity continuously
adapts to changing conditions. Ensure that
the glass front control surface is clean and
free of any obstacles when turning on the
oven.
If the clock does not respond correctly when
you touch the glass control, it will be neces-
sary to turn off the oven for a few seconds
and then turn it back on. By doing this, the
sensors adjust automatically and will react
once more to fingertip control.
Setting the Electronic Clock
When you connect the oven, you will notice
that 12:00 will flash and the symbols + and –
light up. Set the clock by touching the + or –
symbols on the glass. You will hear 2 beeps
confirming the time has been set.
To change the time, touch the + and –
symbols together until the indicated time flas-
hes on the display. Adjust the time with the +
or – symbols.
The two beeps you hear after that will confirm
the new time has been set.
Manual Operation
After setting the clock, the oven is ready for
use. Select a cooking temperature and func-
tion by pressing and turning the oven controls.
During cooking, the symbol will light up to
indicate that the oven is supplying heat to the
food.
To turn off the oven, set the controls to .
Push down on the controls to conceal them.
Electronic Clock functions
Fast preheating: This function shortens the
time it takes to heat a cold oven.
Timer Alarm: An audible signal is produced at
the programmed time, even if the oven is not
being used.
Cooking Time: This function allows you to pro-
gramme cooking time length, after which the
oven will turn off automatically.
Cooking Stop Time: This function allows you
to programme the time for cooking to stop,
after which the oven will turn off automatically.
Cooking Time and Cooking Stop Time: This
function allows both cooking time length and
the stop time to be programmed. The oven
turns on automatically at the set time and
operates for the cooking time it has been pro-
grammed for. It turns off automatically at the
programmed stop time.
Child Safety Function. This function locks the
oven, preventing small children from playing
with it.
Fast Preheating
1 Select a cooking function and temperature.
2 Touch the symbol on the glass panel. The
symbol will flash and preheating will start.
When the oven reaches the programmed
temperature, the symbol will turn off.
Touching the symbol again at any time will
turn off the preheating function.
NB
Food should only be placed in the oven once
the fast preheating function has finished and
the symbol is off.
Programming the Timer Alert
1 Touch the symbol on the glass surface.
It will begin to flash. 00:00 will appear on
the display and the + and – will light up.
2 Set the alarm time by touching the + or –
symbols.