Filter
Top Products
size of the cookware.
CONNECTING / TURNING ON THE
DOUBLE AND TRIPLE CIRCUIT HEA-
TING ELEMENTS
1 Choose the desired power level (from 1
to 9) using the cursor.
2 Touch the double ring sensor button
(6) to activate the second circuit. Indica-
tor light (10) will turn on, which indicates
that the outer ring is activated.
3 In model TRX 635, if you want to activa-
te the third ring after turning the second
ring on, the touch sensor button (6)
again. After doing so, the second indica-
tor light will turn on.
DISCONNECTING / TURNING OFF THE
DOUBLE CIRCUIT
1 Touch the double ring sensor button
(6). The indicator light (10) will turn off
and the outer ring will be disconnected.
DISCONNECTING / TURNING OFF THE
TRIPLE CIRCUIT (MODEL TRX 635)
1 Touch the sensor button (6). The
second indicator light (10) will turn off
and the third ring will be disconnected.
2 Touch the sensor button (6) again.
The first indicator light (10) and the
second ring will be disconnected. Only
the first circuit will be activated.
Energy supplied according to
the power level chosen
Please remember that the heating
elements adjust the energy supplied
according to the size and type (material) of
the cookware being used. Smaller cook-
ware will receive less energy than larger
cookware.
Cookware detection
(models IRX… and IQX...)
The induction cooking zones have an
incorporated cookware detector. This will
prevent the heating element from working
if there is no cookware placed on it or if the
cookware is inadequate.
The power indicator will show the symbol
meaning that "there is no cookware" if
no cookware is detected when the zone is
on or if the cookware is inadequate.
If the cookware is taken off of the cooking
zone while the zone is functioning, the
heating element will automatically stop
supplying energy and the "there is no
cookware" symbol will go on. When the
cookware is once again placed on the coo-
king zone, energy will once again be sup-
plied at the power level that was chosen.
The cookware detection time is 10 minu-
tes. If no cookware is placed on the zone
during this time, or if the cookware is
inadequate, the cooking zone will deacti-
vate. The power indicator will show the
symbol "there is no cookware" or 0.
After use, disconnect the cooking
zone by using the touch control panel.
Otherwise, an undesired operation
could occur in the cooking zone if a
piece of cookware is accidentally pla-
ced on the cooking zone during the
following 10 minutes. Avoid possible
accidents!
Recovery Function
(models IRX… and IQX...)
If the touch control panel has been turned
off by mistake, the Recovery Function
makes it possible to quickly recover all of
GB
23